HY-1000

Chiller Technical
Aquarium Size	between 60-200 gallons
Horsepower	1/4 HP
Wifi Capable	YES
Maximum Pressure	8.7 psi
Minimum Flow Rate	132 gallons per hour
Maximum Flow Rate	211 gallons per hour
Water Inlet/Outlet Thread	3/4" SAE thread (19mm)
Inlet/Outlet Barb Fitting	D 5/8" (0.63" or 16 mm)
Exchanger	Titanium
Supply	120V-60Hz
Power Consumption	315 Watts
Gas/Refrigerant	R290
Minimum Set Point	60.8°F
Maximum Set Point	71.6°F
Weight	41.1 lbs (20.0 kg)
Dimensions	12.2" x 12.2" x 18.03"

Cooling Performance

The ability of the HY-1000 to pull down temperatures in a 86°F room:

Aquarium Size	Temp. Attainable	Heating Load	Net Pull-Down	C.O.P.*
260 gallons	77°F from 86°F	1.89 Watts/gal	9°F cooler	2.1
55 gallons	47°F from 86°F	0.38 Watts/gal	39°F cooler	1.3

* Coefficient of Performance (COP) - a numerical value that represents cooling performance from a baseline room temperature of 86°F and a typical heat source (aka. Heating Load)

HY-1000

Shipping & Handling Extra **** Ground or Expedited

for standard systems & aquariums up to 200 gallons

The new Hydroponics chiller line is the next generation of TECO chillers--used by consumers and professionals for over two decades. New changes include an increase in cooling efficiency and improved usability, functionality, and durability.

EFFICIENT COOLING TECHNOLOGY

Internationally-recognized high-end compressors and titanium coaxial heat exchangers provide high performance, low energy consumption, and low noise levels.

BUILT-IN HEATER

The Hydroponics HY-1000 comes standard with a heater built into the unit (previously, had to be purchased and installed separately). The built-in heater provides better control over water temperatures and can be operated through the digital thermostat.

DIGITAL THERMOSTAT

Intuitive controller with accurate temperature detection from 60.8°F to 71.6°F. Closed loop temperature control system with an extremely tight differential of 1°C. Displays in °F or °C, and audible alarms for certain situations.

EFFICIENT DESIGN

A solid and durable structure designed to guarantee near perfect protection against corrosion. Rotatable in-set water connections, rotatable exhaust conveyor, and smaller form-factor help facilitate placement of chiller in confined spaces.