Hot

Chiller Technical
Aquarium Size	up to 1300 gallons
Horsepower	1 HP
Wifi Capable	No
Built-in Heater	Optional Add On
Maximum Pressure	14.5 psi
Minimum Flow Rate	793 gallons per hour
Maximum Flow Rate	1057 gallons per hour
Water Inlet/Outlet Thread	1" ID British Standard Pipe Thread (BSPT)
Inlet/Outlet Barb Fitting	7/8" ID Barb
Exchanger	Titanium
Supply	120V-60Hz
Power Consumption	900 Watts
Gas/Refrigerant	R410A
Weight	110.2 lbs (50.0 kg)
Dimensions	23.62" x 15.16" 25.59"

Cooling Performance

The ability of the TK-6000 to pull down temperatures in a 86°F room:

Aquarium Size	Temp. Attainable	Heating Load	Net Pull-Down	C.O.P.*
1580 gallons	77°F	1.89 Watts/gal	9°F cooler	3.0
400 gallons	47°F	0.38 Watts/gal	39°F cooler	1.4

* Coefficient of Performance (COP) - a numerical value that represents cooling performance from a baseline room temperature of 86°F and a typical heat source (aka. Heating Load)

TK-6000

Shipping & Handling Extra **** Ground or Expedited

tk-6000: for large systems & aquariums up to 1300 gallons

The new TANK® chiller line is the next generation of TECO's flagship SeaChill™ aquarium chillers—used by consumers and professionals for over a decade. The TECO TANK is the result of one of TECO's most ambitious and comprehensive redesigns of the SeaChill aquarium chiller to-date. New changes include an increase in cooling efficiency and improved usability, functionality, and durability.

EFFICIENT COOLING TECHNOLOGY

Internationally-recognized high-end compressors and titanium coaxial heat exchangers provide high performance, low energy consumption, and low noise levels.

DIGITAL THERMOSTAT

Intuitive controller with accurate temperature detection from 32 to 95°F. Closed loop temperature control system with an extremely tight differential of 1°C. Displays in °F or °C, and audible alarms for certain situations.

EFFICIENT DESIGN

A solid and durable structure designed to guarantee near perfect protection against corrosion. Rotatable in-set water connections, rotatable exhaust conveyor, and smaller form-factor help facilitate placement of chiller in confined spaces.

** Each unit can be customized to include up to 4 Heaters/4 UV Lamps or any combination, up to 4 total pieces. Select 'Blank' for any spaces you would like left empty. If interested in using this unit for CHILLING ONLY, select 'Blank' for all listed options below. **

Optional Thread Adapter available for purchase upon request.